dmesg - NVIDIA GeForce GTX 285
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-0-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-18ubuntu1) ) #4-Ubuntu SMP Tue Jan 15 20:39:36 UTC 2013 (Ubuntu 3.8.0-0.4-generic 3.8.0-rc3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f78ffff] usable
BIOS-e820: [mem 0x000000007f790000-0x000000007f7e2fff] ACPI NVS
BIOS-e820: [mem 0x000000007f7e3000-0x000000007f7effff] ACPI data
BIOS-e820: [mem 0x000000007f7f0000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: OEM OEM/X58 SLI Classified, BIOS 6.00 PG 08/25/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x200000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 080000000 mask F80000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 2GB, range: 2GB, type UC
total RAM covered: 6144M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000f5aa0-0x000f5aaf] mapped at [c00f5aa0]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x360a4000-0x37049fff]
ACPI: RSDP 000f9ce0 00024 (v02 IntelR)
ACPI: XSDT 7f7e3080 0005C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 7f7eb440 000F4 (v03 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000450/0x0 (20121018/tbfadt-598)
ACPI BIOS Bug: Warning: Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20121018/tbfadt-648)
ACPI: DSDT 7f7e3200 079E5 (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 7f790000 00040
ACPI: HJKL 7f7eac00 00400 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: ZXCV 7f7eb000 00424 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: HPET 7f7eb680 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098)
ACPI: MCFG 7f7eb6c0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 7f7eb540 0012C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: SSDT 7f7eb700 0219C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
7300MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0xffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0x7f78ffff]
node 0: [mem 0x00000000-0xffffffff]
On node 0 totalpages: 1570590
free_area_init_node: node 0, pgdat c18eff00, node_mem_map f20a4200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 14601 pages used for memmap
HighMem zone: 1327753 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x10] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 16, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: 16 Processors exceeds NR_CPUS limit of 8
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7b7b000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1554205
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 16777088 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00200000)
Memory: 6172132k/8388608k available (6239k kernel code, 110228k reserved, 2961k data, 780k init, 5369416k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc18fd000 - 0xc19c0000 ( 780 kB)
.data : 0xc1617d30 - 0xc18fc240 (2961 kB)
.text : 0xc1000000 - 0xc1617d30 (6239 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f740a000 soft=f740c000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3316.648 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6633.29 BogoMIPS (lpj=13266592)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26034 entries in 51 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 975 @ 3.33GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f74ea000 soft=f74ec000
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1
CPU 2 irqstacks, hard=f75c4000 soft=f75c6000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f7628000 soft=f762a000
Initializing CPU#3
#3
CPU 4 irqstacks, hard=f766c000 soft=f766e000
Initializing CPU#4
#4
CPU 5 irqstacks, hard=f76aa000 soft=f76ac000
Initializing CPU#5
#5
CPU 6 irqstacks, hard=f76f6000 soft=f76f8000
Initializing CPU#6
#6
CPU 7 irqstacks, hard=f775e000 soft=f7760000
#7 OK
Initializing CPU#7
Brought up 8 CPUs
smpboot: Total of 8 processors activated (53066.36 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7f790000-0x7f7e2fff] (339968 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: [8086:3400] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xf3ffe000-0xf3ffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf3ff4000-0xf3ff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf3ffd000-0xf3ffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 0007)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907]
pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803]
pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707]
pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603]
pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f]
pci 0000:00:1f.2: reg 24: [mem 0xf3ffc000-0xf3ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf3ffb000-0xf3ffb0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:02:00.0: [10de:05e3] type 00 class 0x030000
pci 0000:02:00.0: reg 10: [mem 0xde000000-0xdeffffff]
pci 0000:02:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xdc000000-0xddffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0x9f00-0x9f7f]
pci 0000:02:00.0: reg 30: [mem 0xdff80000-0xdfffffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:03.0: bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:04:00.0: [10de:05e3] type 00 class 0x030000
pci 0000:04:00.0: reg 10: [mem 0xda000000-0xdaffffff]
pci 0000:04:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:04:00.0: reg 1c: [mem 0xd8000000-0xd9ffffff 64bit]
pci 0000:04:00.0: reg 24: [io 0xaf00-0xaf7f]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
pci 0000:00:07.0: bridge window [mem 0xd8000000-0xdbffffff]
pci 0000:00:07.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:06:00.0: [197b:2363] type 00 class 0x010400
pci 0000:06:00.0: reg 24: [mem 0xf3cfe000-0xf3cfffff]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:06:00.1: [197b:2363] type 00 class 0x010185
pci 0000:06:00.1: reg 10: [io 0x8f00-0x8f07]
pci 0000:06:00.1: reg 14: [io 0x8e00-0x8e03]
pci 0000:06:00.1: reg 18: [io 0x8d00-0x8d07]
pci 0000:06:00.1: reg 1c: [io 0x8c00-0x8c03]
pci 0000:06:00.1: reg 20: [io 0x8b00-0x8b0f]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.0: bridge window [mem 0xf3c00000-0xf3cfffff]
pci 0000:07:00.0: [197b:2363] type 00 class 0x010400
pci 0000:07:00.0: reg 24: [mem 0xf3afe000-0xf3afffff]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:07:00.1: [197b:2363] type 00 class 0x010185
pci 0000:07:00.1: reg 10: [io 0xdf00-0xdf07]
pci 0000:07:00.1: reg 14: [io 0xde00-0xde03]
pci 0000:07:00.1: reg 18: [io 0xdd00-0xdd07]
pci 0000:07:00.1: reg 1c: [io 0xdc00-0xdc03]
pci 0000:07:00.1: reg 20: [io 0xdb00-0xdb0f]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 10: [io 0xce00-0xceff]
pci 0000:08:00.0: reg 18: [mem 0xf38ff000-0xf38fffff 64bit pref]
pci 0000:08:00.0: reg 20: [mem 0xf38f8000-0xf38fbfff 64bit pref]
pci 0000:08:00.0: reg 30: [mem 0xf39e0000-0xf39fffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf3900000-0xf39fffff]
pci 0000:00:1c.2: bridge window [mem 0xf3800000-0xf38fffff 64bit pref]
pci 0000:09:00.0: [1102:000b] type 00 class 0x040300
pci 0000:09:00.0: reg 10: [mem 0xd7ff0000-0xd7ffffff 64bit]
pci 0000:09:00.0: reg 18: [mem 0xd7c00000-0xd7dfffff 64bit]
pci 0000:09:00.0: reg 20: [mem 0xd0000000-0xd3ffffff 64bit]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd7ffffff]
pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0a:00.0: reg 10: [io 0xbe00-0xbeff]
pci 0000:0a:00.0: reg 18: [mem 0xf3dff000-0xf3dfffff 64bit pref]
pci 0000:0a:00.0: reg 20: [mem 0xf3df8000-0xf3dfbfff 64bit pref]
pci 0000:0a:00.0: reg 30: [mem 0xf3ee0000-0xf3efffff pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:00:1c.4: bridge window [mem 0xf3d00000-0xf3dfffff 64bit pref]
pci 0000:0b:03.0: [104c:8023] type 00 class 0x0c0010
pci 0000:0b:03.0: reg 10: [mem 0xf3bff000-0xf3bff7ff]
pci 0000:0b:03.0: reg 14: [mem 0xf3bf8000-0xf3bfbfff]
pci 0000:0b:03.0: supports D1 D2
pci 0000:0b:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 5 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 9 *10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f790000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0800-0x0805] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x0400-0x04bf] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:09: [mem 0x7f800000-0x7fffffff] has been reserved
system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:09: [mem 0x7f790000-0x7f7fffff] could not be reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0x7f78ffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfed13000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed9ffff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:09: [mem 0x000e0000-0x000effff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.3: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:03.0: bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 6: assigned [mem 0xdb000000-0xdb07ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
pci 0000:00:07.0: bridge window [mem 0xd8000000-0xdbffffff]
pci 0000:00:07.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.0: bridge window [mem 0xf3c00000-0xf3cfffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf3900000-0xf39fffff]
pci 0000:00:1c.2: bridge window [mem 0xf3800000-0xf38fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd7ffffff]
pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:00:1c.4: bridge window [mem 0xf3d00000-0xf3dfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b]
pci 0000:00:1e.0: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:00:1c.3: enabling device (0006 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdfffffff]
pci_bus 0000:02: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xd8000000-0xdbffffff]
pci_bus 0000:04: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:06: resource 1 [mem 0xf3c00000-0xf3cfffff]
pci_bus 0000:06: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xf3a00000-0xf3afffff]
pci_bus 0000:07: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xf3900000-0xf39fffff]
pci_bus 0000:08: resource 2 [mem 0xf3800000-0xf38fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:09: resource 1 [mem 0xd0000000-0xd7ffffff]
pci_bus 0000:09: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0a: resource 1 [mem 0xf3e00000-0xf3efffff]
pci_bus 0000:0a: resource 2 [mem 0xf3d00000-0xf3dfffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xf3b00000-0xf3bfffff]
pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0b: resource 8 [mem 0x80000000-0xfebfffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16024k freed
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1358503140.480:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1599
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (27 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc180 irq 45
ata3: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc200 irq 45
ata4: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc280 irq 45
ata5: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc300 irq 45
ata6: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc380 irq 45
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xf3cfe000 port 0xf3cfe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xf3cfe000 port 0xf3cfe180 irq 16
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xf3afe000 port 0xf3afe100 irq 17
ata10: SATA max UDMA/133 abar m8192@0xf3afe000 port 0xf3afe180 irq 17
pata_acpi 0000:06:00.1: enabling device (0000 -> 0001)
pata_acpi 0000:06:00.1: setting latency timer to 64
scsi10 : pata_acpi
scsi11 : pata_acpi
ata11: PATA max UDMA/133 cmd 0x8f00 ctl 0x8e00 bmdma 0x8b00 irq 17
ata12: PATA max UDMA/133 cmd 0x8d00 ctl 0x8c00 bmdma 0x8b08 irq 17
pata_acpi 0000:07:00.1: setting latency timer to 64
scsi12 : pata_acpi
scsi13 : pata_acpi
ata13: PATA max UDMA/133 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18
ata14: PATA max UDMA/133 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf3ffe000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-0-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3ffd000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-0-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-0-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-0-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.8.0-0-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.8.0-0-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.8.0-0-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.8.0-0-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0b41438a1dd751e2491f7b4dcdcb7452fe4eea6e'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:03: setting system clock to 2013-01-18 09:59:01 UTC (1358503141)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata13.00: ATAPI: Memorex 52MAX 325216AJv2, RW$5, max UDMA/33
ata13.00: configured for UDMA/33
isapnp: No Plug & Play device found
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Corsair Neutron GTX SSD, M206, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Corsair Neutron M206 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
ata9.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata9.00: failed to get Identify Device Data, Emask 0x1
ata10.00: ATA-8: WDC WD3000HLFS-01G6U0, 04.04V01, max UDMA/133
ata10.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata10.00: failed to get Identify Device Data, Emask 0x1
ata9.00: failed to get Identify Device Data, Emask 0x1
ata9.00: configured for UDMA/133
ata10.00: failed to get Identify Device Data, Emask 0x1
ata10.00: configured for UDMA/133
usb 2-1: New USB device found, idVendor=05ac, idProduct=1294
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: iPhone
usb 2-1: Manufacturer: Apple Inc.
usb 2-1: SerialNumber: 404f46a8ce9912cdee85067d4df0eb91e376bb57
ata2: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3316.687 MHz
Switching to clocksource tsc
usb 4-2: new full-speed USB device number 2 using uhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
usb 4-2: New USB device found, idVendor=1532, idProduct=0034
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Razer Taipan
usb 4-2: Manufacturer: Razer
ata4: SATA link down (SStatus 0 SControl 300)
usb 7-1: new full-speed USB device number 2 using uhci_hcd
usb 7-1: New USB device found, idVendor=1532, idProduct=011a
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Razer BlackWidow Ultimate 2013
usb 7-1: Manufacturer: Razer
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 8:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 9:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdc] 586072368 512-byte logical blocks: (300 GB/279 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: unknown partition table
sdb: sdb1 sdb2 < > sdb3 sdb4
sdb: partition table partially beyond EOD, enabling native capacity
sd 9:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb2 < > sdb3 sdb4
sdb: partition table partially beyond EOD, truncated
sdb: p1 size 838860800 extends beyond EOD, truncated
sdb: p2 start 962382334 is beyond EOD, truncated
sdb: p4 start 986381824 is beyond EOD, truncated
sd 8:0:0:0: [sdb] Attached SCSI disk
scsi 12:0:0:0: CD-ROM Memorex 52MAX 325216AJv2 RW$5 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 12:0:0:0: Attached scsi CD-ROM sr0
sr 12:0:0:0: Attached scsi generic sg3 type 5
Freeing unused kernel memory: 780k freed
Write protecting the kernel text: 6240k
Write protecting the kernel read-only data: 2420k
NX-protecting the kernel data: 4000k
udevd[162]: starting version 175
Disabling lock debugging due to kernel taint
xor: automatically using best checksumming function:
pIII_sse : 12325.000 MB/sec
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0: irq 46 for MSI/MSI-X
r8169 0000:08:00.0 eth0: RTL8168d/8111d at 0xf8410000, 00:1f:bc:01:8c:0a, XID 081000c0 IRQ 46
r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:00.0: irq 47 for MSI/MSI-X
r8169 0000:0a:00.0 eth1: RTL8168d/8111d at 0xf8432000, 00:1f:bc:01:8c:0b, XID 081000c0 IRQ 47
r8169 0000:0a:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
device-mapper: dm-raid45: initialized v0.2594b
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
firewire_ohci 0000:0b:03.0: setting latency timer to 64
input: Razer Razer Taipan as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input2
hid-generic 0003:1532:0034.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Taipan] on usb-0000:00:1a.1-2/input0
input: Razer Razer Taipan as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input3
hid-generic 0003:1532:0034.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Taipan] on usb-0000:00:1a.1-2/input1
input: Razer Razer Taipan as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.2/input/input4
hid-generic 0003:1532:0034.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer Taipan] on usb-0000:00:1a.1-2/input2
input: Razer Razer BlackWidow Ultimate 2013 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input5
hid-generic 0003:1532:011A.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2013] on usb-0000:00:1d.1-1/input0
input: Razer Razer BlackWidow Ultimate 2013 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input6
hid-generic 0003:1532:011A.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2013] on usb-0000:00:1d.1-1/input1
input: Razer Razer BlackWidow Ultimate 2013 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.2/input/input7
hid-generic 0003:1532:011A.0006: input,hidraw5: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate 2013] on usb-0000:00:1d.1-1/input2
firewire_ohci 0000:0b:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
bio: create slab at 1
firewire_core 0000:0b:03.0: created device fw0: GUID 696100006e566964, S400
EXT4-fs (dm-3): INFO: recovery required on readonly filesystem
EXT4-fs (dm-3): write access will be enabled during recovery
EXT4-fs (dm-3): orphan cleanup on readonly fs
EXT4-fs (dm-3): ext4_orphan_cleanup: deleting unreferenced inode 786533
EXT4-fs (dm-3): 1 orphan inode deleted
EXT4-fs (dm-3): recovery complete
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[754]: starting version 175
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM2S 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Bluetooth: Core ver 2.16
ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPO2 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPO_ 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
EDAC MC: Ver: 3.0.0
wmi: Mapper loaded
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x16
device-mapper: multipath: version 1.5.0 loaded
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x16
microcode: Microcode Update Driver: v2.00 , Peter Oruba
type=1400 audit(1358521148.276:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1181 comm="apparmor_parser"
type=1400 audit(1358521148.276:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1175 comm="apparmor_parser"
type=1400 audit(1358521148.276:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1178 comm="apparmor_parser"
type=1400 audit(1358521148.276:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1181 comm="apparmor_parser"
type=1400 audit(1358521148.276:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1181 comm="apparmor_parser"
type=1400 audit(1358521148.276:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1175 comm="apparmor_parser"
type=1400 audit(1358521148.276:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1178 comm="apparmor_parser"
type=1400 audit(1358521148.276:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1175 comm="apparmor_parser"
type=1400 audit(1358521148.276:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1178 comm="apparmor_parser"
type=1400 audit(1358521148.336:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=910 comm="apparmor_parser"
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
ipheth 2-1:4.2: Apple iPhone USB Ethernet device attached
usbcore: registered new interface driver ipheth
init: failsafe main process (1286) killed by TERM signal
nvidia: module license 'NVIDIA' taints kernel.
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:02:00.0 to PCI:0000:04:00.0
nvidia 0000:04:00.0: enabling device (0000 -> 0003)
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86 Kernel Module 313.18 Wed Jan 9 16:31:26 PST 2013
r8169 0000:08:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:0a:00.0 eth1: link down
r8169 0000:0a:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
init: udev-fallback-graphics main process (1879) terminated with status 1
init: gdm main process (1889) killed by TERM signal
r8169 0000:0a:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
usb 2-1: usbfs: interface 1 claimed by usbfs while 'pool' sets config #1
show_signal_msg: 66 callbacks suppressed
update-notifier[3345]: segfault at 18 ip b5a98652 sp bf8bf7b0 error 4 in libgvfscommon.so[b5a88000+32000]
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.8.0/arch/x86/kernel/apic/ipi.c:109 default_send_IPI_mask_logical+0xb2/0xf0()
Hardware name: OEM
empty IPI mask
Modules linked in: nvidia(POF) ipheth coretemp kvm_intel kvm joydev(F) snd_ctxfi snd_hda_codec_realtek snd_seq_midi(F) snd_seq_midi_event(F) snd_rawmidi(F) snd_hda_intel snd_hda_codec snd_seq(F) snd_seq_device(F) snd_hwdep(F) snd_pcm(F) snd_page_alloc(F) snd_timer(F) dm_multipath(F) snd(F) soundcore(F) microcode(F) scsi_dh bnep rfcomm i7core_edac mxm_wmi psmouse(F) wmi edac_core serio_raw(F) lpc_ich bluetooth mac_hid parport_pc(F) ppdev(F) lp(F) parport(F) binfmt_misc(F) hid_generic firewire_ohci firewire_core crc_itu_t(F) dm_raid45 r8169 usbhid hid xor(F) dm_mirror(F) dm_region_hash(F) dm_log(F)
Pid: 3184, comm: Cef_IOThread Tainted: PF O 3.8.0-0-generic #4-Ubuntu
Call Trace:
[] warn_slowpath_common+0x72/0xa0
[] ? default_send_IPI_mask_logical+0xb2/0xf0
[] ? default_send_IPI_mask_logical+0xb2/0xf0
[] warn_slowpath_fmt+0x33/0x40
[] default_send_IPI_mask_logical+0xb2/0xf0
[] native_send_call_func_ipi+0x45/0x60
[] smp_call_function_many+0x172/0x200
[] ? do_flush_tlb_all+0x50/0x50
[] native_flush_tlb_others+0x2b/0x30
[] flush_tlb_page+0x51/0xa0
[] ptep_clear_flush+0x42/0x60
[] do_wp_page+0x29a/0x910
[] ? ptrace_stop+0x16a/0x220
[] handle_pte_fault+0x234/0x520
[] ? hrtimer_cancel+0x19/0x30
[] ? kmap_atomic_prot+0xe7/0x100
[] handle_mm_fault+0x1f5/0x2c0
[] __do_page_fault+0x180/0x4b0
[] ? _raw_spin_lock_irqsave+0x2d/0x40
[] ? copy_to_user+0x41/0x60
[] ? try_to_wake_up+0x230/0x230
[] ? __do_page_fault+0x4b0/0x4b0
[] do_page_fault+0xd/0x10
[] error_code+0x67/0x6c
[] ? set_cpu_sibling_map+0x2/0x31e
---[ end trace 03c1df41930d0bd6 ]---
usb 2-1: usbfs: interface 1 claimed by usbfs while 'pool' sets config #1
update-notifier[6740]: segfault at 18 ip b5a73652 sp bfae8390 error 4 in libgvfscommon.so[b5a63000+32000]